Industrial Applications
Editorial assessment: T1 is relevant to manipulation research and supervised task pilots. Company-supplied retail/pharmacy case descriptions do not establish independent industrial uptime or a task acceptance rate.
This editorial assessment concerns industrial buyer readiness. It is not an independent performance test.
| EU regulatory fit | Unknown |
|---|---|
| Cybersecurity fit | Unknown |
| Serviceability fit | Unknown |
| Supply chain fit | Unknown |
Manipulation and Perception
Launch reports list 5 kg single-arm payload and 23 DOF excluding end effectors. Exact reach, end-effector mass and duty cycle require a datasheet.
Model-specific cameras, LiDAR and force-sensing configuration not verified in reviewed primary material.
SDK and Integration
Gasgoo reports replaceable end effectors and compute backpack. T1-specific languages, ROS, simulators and public SDK/API reference remain unverified.
| API type | T1 interfaces reported; public API reference not verified |
|---|---|
| Languages | Needs verification |
| ROS support | Needs verification |
| Simulation | No T1-specific simulation support verified |
| Offline operation | Exact-model cloud dependencies and offline operation unverified. |
| Teleoperation | VR teleoperation described for S1; T1-specific scope unverified. |
| Software updates | Model firmware update and rollback policy unverified. |
| Integration constraints | Treat as an early humanoid/developer platform. Production-cell integration requires local safety engineering, PLC/SCADA/MES integration work, guarded pilot design, and cybersecurity review. |
S1 software claims are not automatically transferred to T1.
Safety Notes
No verified collaborative or industrial safety certification captured. Use guarded cells, restricted access, emergency stop integration, speed limits, test-mode procedures, and integrator-led risk assessment.
Compliance and Certificates
| Standard | Status | Jurisdiction | Evidence |
|---|---|---|---|
| CE marking | Unknown | European Union | No verified CE declaration or certificate for Astribot T1 was captured. Request EU Declaration of Conformity, technical file summary, risk assessment, EMC/radio evidence, battery documentation, and responsible EU economic operator details. |
| ISO 10218 review required | Requires buyer review | International / European Union | Factory deployment requires integrator-led robot-cell risk assessment, safeguarding, emergency stops, operating modes, validation, maintenance procedures, and operator training. |
| ISO/TS 15066 review required | Requires buyer review | International / European Union | Only relevant if humans share workspace with the robot. Validate contact forces, speed/separation monitoring, protective stops, and human access zones. |
| Machinery Regulation (EU) 2023/1230 review required | Requires buyer review | European Union | European factory use requires review of the exact robot, end effectors, software, safety functions, integration, operating environment, and intended use. |
Commercial Readiness
| Pricing | Reported China launch starting price CNY 89,900 (Gasgoo, 3 June 2026). Configuration, tax, freight and current quote unverified. |
|---|---|
| Price range | 89900.00 CNY |
| Lead time | Needs verification |
| Availability regions | China, Global interest reported |
| Spare parts | Confirm availability and lead times for batteries, chargers, grippers, dexterous hands, actuators, drive wheels, cables, sensors, covers, and controller hardware before deployment. |
| Warranty | Exact-model warranty duration, exclusions and regional repair terms unverified. |
| Configuration and pricing basis | China reported starting price, Gasgoo 3 June 2026; not a converted USD quote or current landed EU price. |
| Distributors and service | S1 listed on RBTX; a T1 appointment is not established. |
A reseller lead-time estimate is not a guaranteed shipment commitment.
Specifications
| Height | Unknown |
|---|---|
| Weight | 66.00 kg |
| Payload | 5.00 kg |
| Runtime | Unknown |
| Battery and runtime conditions | No manufacturer operating-runtime or pack-capacity specification verified. Gasgoo reports sub-one-hour charging; not an operating-runtime measurement. |
| Degrees of freedom | 23 |
| Max speed | Unknown |
| Locomotion | Wheeled humanoid Source ↗ |
| Height | Unknown: 1550 mm (Xinhua) vs 1530 mm (Gasgoo); variant not established. Source ↗ |
| Weight | About 66 kg (Xinhua launch report); exact configured mass requires a manufacturer datasheet. Source ↗ |
| Connectivity | Ethernet and Wi-Fi reported by third-party database; verify before purchase. Source ↗ |
| Height conflict | Xinhua reports 1550 mm; Gasgoo reports 1530 mm. Exact variant/test condition not stated; core height left unknown. Source ↗ |
| Reported chassis dimensions | 550 × 560 mm (Gasgoo); exact shipped configuration requires confirmation. Source ↗ |
| Hand / gripper options | Robot grippers and five-finger dexterous end effectors reported; exact factory configuration needs verification. Source ↗ |
| Ingress protection | Unknown; no exact-model IP rating verified. Source ↗ |
| Single-arm payload | 5 kg Source ↗ |
| Degrees of freedom excluding end effectors | 23 Source ↗ |
Sources and Further Reading
-
Astribot partner page ↗
RBTX / igus · Accessed Nov 1, 2026
Third-party partner overview describing Astribot company focus and open development ecosystem.
-
Astribot S1 product page ↗
Astribot / Stardust Intelligence · Accessed Nov 1, 2026
Official supplier product information for S1; buyer should verify shipped configuration, certificates, EU importer status, and safety documentation independently.
-
European Commission machinery legislation overview (context only) ↗
European Commission · Accessed Nov 2, 2026
Current Commission overview opened November 2, 2026: Machinery Directive and Regulation 2023/1230 transition; overview gives January 20, 2027 mandatory application of the Regulation. General context, not a model declaration or legal determination for a specific installation. EUR-Lex pages returned a verification challenge, so this readable primary Commission overview is cited instead.
-
ISO 10218-1:2025 publisher scope (context only) ↗
ISO · Accessed Nov 2, 2026
Current publisher abstract/catalogue opened November 2, 2026. Part 1 addresses industrial robots; public-access service/consumer applications and mobile-platform mobility hazards are outside its stated scope. Full paid standard not acquired. Context only: this is not a model certificate, conformity finding or validated stopping test.
-
ISO 10218-2:2025 integration scope (context only) ↗
ISO · Accessed Nov 2, 2026
Current publisher abstract/catalogue opened November 2, 2026. Part 2 covers industrial robot applications and cells, with application exclusions. Full paid standard not acquired. Context only; does not certify this robot or prove that industrial-cell provisions alone cover public-service use and mobile hazards.
-
绳驱AI机器人星尘智能完成10亿元新一轮融资 ↗
China Securities Journal / CS.com.cn · Published Oct 13, 2026 · Accessed Nov 1, 2026
Reported new CNY 1 billion financing at CNY 15 billion valuation; Toukong Donghai led. Also reports June T1 shipments. Company statements and named investors are not audited transaction filings.
-
星尘智能WAIC落地实录：全栈方案进入蚂蚁、京东、中科创达等真实场景 ↗
Astribot supplied / Gasgoo · Published Jul 18, 2026 · Accessed Nov 1, 2026
Explicitly company-supplied article. Describes pharmacy and retail operation claims; exhibition appearance and autonomous operation claims do not establish independent uptime or model-specific acceptance.
-
Seeds | 星尘智能完成超10亿元B轮融资 ↗
Gasgoo · Published Jun 3, 2026 · Accessed Nov 1, 2026
Reports T1 from CNY 89,900, 23 DOF excluding end effectors, 5 kg single-arm load; height 1.53 m conflicts with Xinhua 1.55 m. Labels T1 photograph as supplied by Astribot.
-
Astribot unveils T1 wheeled humanoid robot from around $14,000 ↗
Xinhua · Published May 28, 2026 · Accessed Nov 1, 2026
Launch reporting: 1550 mm, approximately 66 kg, 23 DOF excluding end effectors and 5 kg per arm. Not a manufacturer datasheet; height differs from Gasgoo reporting.
-
Astribot unveils T1 wheeled humanoid robot from around $14,000 ↗
Xinhua · Published May 28, 2026 · Accessed Nov 1, 2026
Launch reporting: 1550 mm, approximately 66 kg, 23 DOF excluding end effectors and 5 kg per arm. Not a manufacturer datasheet; height differs from Gasgoo reporting.