Industrial Applications
This page preserves the older 25-DOF base X2: a compact interaction and performance robot with five-joint arms and no secondary-development entitlement in its official comparison. It is distinct from both the 30-DOF Neo and developer-equipped Ultra editions.
This editorial assessment concerns industrial buyer readiness. It is not an independent performance test.
| EU regulatory fit | Unknown |
|---|---|
| Cybersecurity fit | Unknown |
| Serviceability fit | Unknown |
| Supply chain fit | Unknown |
Manipulation and Perception
Published maximum 3 kg in specific postures versus at most 1 kg across the full range, excluding end effector. The older base has five joints per arm.
Interactive RGB camera; no LiDAR, RGB-D or Orin developer board in the official comparison.
SDK and Integration
The official comparison does not support secondary development for this edition. Do not apply Ultra SDK rights.
| API type | The official comparison does not support secondary development for this edition. Do not apply Ultra SDK rights. |
|---|---|
| Languages | Unknown for this exact configuration |
| ROS support | Not established for this exact configuration |
| Simulation | No exact-model supported simulator/version established |
| Offline operation | End-to-end offline task operation not verified |
| Teleoperation | Confirm model-specific controller, VR kit and license compatibility |
| Software updates | Obtain exact firmware and security-support term |
| Documentation | Open documentation |
| Integration constraints | Hardware revision, developer rights and safety/recovery behavior must be agreed before integration. |
Do not infer open actuator access from public product marketing.
Safety Notes
Manufacturer demonstrations and collision/obstacle features do not establish a safe installed application. Verify emergency-stop behavior, fall/crush zones, trained operation and recovery for the delivered unit. Exact-model conformity documents and independent production acceptance evidence remain gaps.
Compliance and Certificates
| Standard | Status | Jurisdiction | Evidence |
|---|---|---|---|
| CE marking | Unknown | European Union | No model-specific declaration was captured from the public page. |
Commercial Readiness
| Pricing | Manufacturer quote required for exact hardware, software rights, hands and destination; no current manufacturer numeric price verified. |
|---|---|
| Price range | Quote-based or unverified |
| Lead time | Needs verification |
| Availability regions | Official sales inquiry; destination and model eligibility by quotation |
| Spare parts | Confirm battery, actuator, hand and sensor revision; no local stock or guaranteed replenishment time verified. |
| Warranty | Exact model/variant duration and local handling require contract confirmation; published policies have limited named-model scope. |
| Configuration and pricing basis | Configuration-specific quotation |
| Distributors and service | European company-level channels documented; authorization and exact-model scope need confirmation. |
Retail listings and trade-show presence do not prove immediate availability.
Specifications
| Height | 1310 mm |
|---|---|
| Weight | 35.00 kg |
| Payload | Unknown |
| Runtime | 120 min |
| Battery and runtime conditions | About two hours walking at 0.5 m/s, charging within 1.5 hours, and swappable battery. Product/catalogue lists 500 Wh. An industrial duty cycle has not been established. |
| Degrees of freedom | 25 |
| Max speed | Unknown |
| X2 Ultra configuration | Original Ultra: 39 kg / 30 DOF. Refreshed Ultra: 39 kg / 31 DOF. Separate profiles; these are not base specifications. Source ↗ |
| Configuration and dimensions | 1310 × 460 × 210 mm; 25 active DOF. Source ↗ |
| Typical operating speed | ≤0.8 m/s Source ↗ |
| Speed conditions | Typical at most 0.8 m/s; product up to 1.8 m/s; brochure/store laboratory figure up to 2 m/s. Match exact edition and conditions. Source ↗ |
Sources and Further Reading
-
AgiBot official documentation index ↗
AgiBot · Accessed Nov 1, 2026
Model-specific documentation index warns earlier X2 manuals may not cover Neo/new Ultra; G2 manual scope for Air/Max not confirmed.
-
AgiBot product portfolio brochure ↗
AgiBot · Accessed Nov 1, 2026
Downloaded 22-page PDF; relevant specification spreads and model illustrations visually inspected. Printed pages 7–10 cover G2/Air/Max; 19–23 X2 Ultra/base/REC/EDU. URL date is not independently confirmed publication date. Brochure and current manuals differ on G2 DOF and EDU mass.
-
AgiBot X2 official product information ↗
AgiBot · Accessed Nov 1, 2026
Current manufacturer product page inspected. Specifications and demonstrations are manufacturer claims; configuration and test conditions matter.
-
AgiBot X2 product page ↗
AGIBOT Innovation (Shanghai) Technology Co., Ltd. · Accessed Nov 1, 2026
Official product page covering the X2 and X2 Ultra variants.
-
AgiBot overseas service guide: A2 / A2-W / G1 / G2 / X2 / D1 ↗
AgiBot · Published Jul 31, 2026 · Accessed Nov 1, 2026
31 July guide names covered series and overseas regions; 30-minute initial response during service hours, repair measures within seven working days after diagnosis. Neither guaranteed restoration time nor a model-specific warranty duration.